Prolonged exposure can result in permanent brain damage or even death.
But what if your carbon monoxide detector beeps for no apparent reason?
While you should take any alarm seriously, carbon monoxide detectors often beep or chirp in non-emergency situations.
Under normal circumstances, these devices release very little carbon monoxide, but that can change if they malfunction.
Some sources of carbon monoxide can be avoided through best practices.
For example, you should never operate an outdoor grill or propane heater indoors.
Never run a generator inside your garage, even if the garage door is open.
Cars can also be a source of carbon monoxide in the home.
Never leave a car running in your garage, especially with the garage door closed.
Is It Safe to Reset a Carbon Monoxide Detector?
Emergency responders can check the source of carbon monoxide and remedy the situation.
If your carbon monoxide detector sounds an alarm, don’t take any chances.
Press the test or reset button and then relocate everyone, including pets, to fresh air.
Call emergency services, and wait for them to provide the all-clear before reentering the structure.
If you have one of these units, then you will have to replace the entire gear.
Some plug-in or hardwired units have backup batteries.
If you have one of these units, try replacing the battery.
You may also have to reset the gadget for it to stop beeping.
Some carbon monoxide detectors include a battery light that will turn yellow or red when the battery is weak.
Consult your owner’s manual or reach out to the manufacturer for more information.
Some units will perform a double chirp every 30 seconds instead of a single chirp.
Carbon monoxide detector manufacturers require you to contact them with your error code to receive more information.
Smart carbon monoxide detectors typically include a connected app that you’re able to install on your smartphone.
These apps sometimes allow you to view error messages, which can help narrow down the problem.
Then reset the unit.
In most cases, you will have to replace the detector.
Carbon monoxide detectors in this state are not capable of alerting you to the presence of carbon monoxide.
After a while, the sensor is no longer able to detect the presence of carbon monoxide adequately.
Some carbon monoxide detectors are designed to last up to 10 years.
Check your owner’s manual or drop a line to the manufacturer if you think yours has failed early.
In some cases, proximity to a gas-burning furnace or stove can cause issues.
If your gas-burning appliance isn’t burning its fuel completely, it will create excessive amounts of carbon monoxide.
If the pilot light has a yellow or orange flame, that’s an indicator of incomplete combustion.
To avoid carbon monoxide poisoning, you should have the appliance repaired or replaced as needed.
Consult your owner’s manual or hit up the manufacturer if you are unable to locate the reset button.
see to it your equipment is plugged in and that power is available.
Consult your owner’s manual or hit up the manufacturer for gadget-specific information.
Smart Carbon Monoxide Detectors Beeping
Smart carbon monoxide detectorsare designed to provide more information than conventional units.
They can link to yoursmart home systemthrough a smart home hub.
Usually, they allow you to control the detector through anappon yoursmartphone.
