The steps below will help you isolate operational problems in a specific component or area where the problem begins.
Replace that cable with anew cableor swap it with a known-good cable to see if that works.
Verify that the balance control is centered and the volume is high enough to be heard.
IvanWuPI / iStock
It doesn’t take much force to cause permanent damage to most cables.
if you bump into splices, check that that the splice is maintaining a safe, proper connection.
If something looks questionable or you are unsure, replace thespeaker wireand check the whole system again.
Klipsch 7.1 Channel Speaker Setup Diagram Example.Image provided by the Klipsch Group
Verify that all wires are securely connected to the terminals on the backs of the receiver/amplifier and the speaker.
Check that there are no frayed ends touching any metal parts even one stray strand can cause a problem.
It may be defective, so check with the product manufacturer for warranty or repair options.
It has to do with something else in thestereo system either the speaker wires or the receiver or amplifier.
