Just skip those steps if that’s not possible.
reset your computerif you haven’t already done so.
The STOP 0x0000007B blue screen error might be a fluke.
Did you just install or make a change to a hard drive controller?
If so, there’s a good chance that the change you made caused the STOP 0x0000007B error.
Undo the change and test for the 0x7B blue screen error.
Incorrect SCSI termination has been known to cause STOP 0x0000007B errors.
Most home computers don’t utilize SCSI hard drives but insteadPATAorSATA.
Verify that the hard drive is properly installed.
An improperly installed hard drive could cause this error and other issues.
Verify that the hard drive is configured properly in BIOS.
The STOP 0x0000007B error could occur if the hard drive options inBIOSare incorrect.
Scan your gear for viruses.
Certain malware that infects themaster boot record(MBR) orboot sectorcan cause STOP 0x0000007B errors.
double-check your virus scanning software is updated and configured to scan the MBR and boot sector.
See ourBest Free Antivirus Softwarelist if you don’t already have one.
Update the drivers for your hard drive controller.
This is a likely solution if the secondhexadecimal numberafterthe STOP code is 0xC0000034.
Change the SATA mode in BIOS toIDEmode.
SeeMicrosoft’s instructionson making that change in Windows Registry.
Run chkdsk on your hard drive.
If the boot volume is corrupted, the chkdsk command might repair the corruption.
You’ll likely have to run chkdsk from theRecovery Console.
This will likely be the solution if the second hexadecimal numberafterthe STOP code is 0xC0000032.
Perform an extensive test of your hard drive.
Replace the hard driveif the diagnostics you complete suggest that there is a hardware problem with the drive.
trigger the fixmbr commandto create a new master boot record.
A corrupted master boot record might be causing your STOP 0x0000007B error.
This will likely be the solution if the second hexadecimal numberafterthe STOP code is 0xC000000E.
Sometimes the STOP 0x0000007B error is resulting from a BIOS memory issue.
Clearing the CMOS could solve that problem.
In some situations, an outdated BIOS could cause this error due to incompatibilities with a hard drive controller.
Update the hard drive controller’sfirmwareif possible.
Repair your Windows installation.
If you’ve just replaced themotherboardin a computer without reinstalling Windows then this will likely fix your problem.
Sometimes a Windows repair will not fix a STOP 0x0000007B error.
In those cases, aclean installation of Windowsshould do the trick.
If you haven’t just replaced your motherboard, a Windows reinstall probablywill notfix your STOP 0x7B issue.
Perform basic STOP error troubleshooting.
Since most STOP errors are similarly caused, some of the suggestions might help.
Need More Help?
Any of Microsoft’s Windows NT based operating systems could experience this error.
