Still, you may encounter issues with your Chromecast dongle, leaving you without any streaming content.

You may not receive any error messages, but the unit stops working.

Here’s a look at why your Chromecast might malfunction and how to get it up and running again.

This article discusses troubleshooting steps for first-generation through third-generation Chromecast devices as well as the Chromecast Ultra.

Unplug your Chromecast, wait a few minutes, and plug it back in.

This often solves the issue.

If restarting the Chromecast didn’t work, reboot your router.

Unplug the Wi-Fi router from the power source.

Wait 30 seconds, and then plug it back in.

See if this solves your Chromecast problems.

Reboot the computer, tablet, or smartphone.

If you control your Chromecast from your phone, tablet, or computer, reboot that gadget.

A quick reboot often solves multiple problems.

If you use a smart TV, check the TV’s instruction manual for rebooting instructions.

Use the Chromecast extender.

Older versions of Chromecast came with an extender.

See if this solves the problem.

Check the router’s frequency.

Most modern routers operate on a frequency of 2.4 GHz, 5 GHz, or both.

Chromecast is compatible only with 2.4 GHz networks, so ensure your router broadcasts on that frequency.

Check for internet congestion.

If the internet is too congested, it can cause low signal quality.

Disconnect unnecessary devices and try the Chromecast again.

Check for a Chromecast firmware update.

You may experience difficulty casting or streaming if your Chromecast needs a firmware update.

Also test whether your router and smart TV need a firmware update.

Change the power supply.

While this works, it can sometimes cause power stuttering and spontaneous restarts.

If you cast from your machine, you may need to update the Chrome web client.

If there’s a newer Chrome version available, you may experience problems with your Chromecast.

Reset the Chromecast to factory configs.

If other measures failed, reset the Chromecast to factory controls, then see if that corrects the problem.

This process changes the Chromecast’s identification number, but this won’t affect your devices.

If you use Chromecast with a smart TV, you might need to power cycle the TV.

Press and hold the power button for 30 seconds and release it to cycle through the TV’s power.

Check the user manual for further instructions.

communicate with the Chromecast support team.

The equipment might be missing some necessary firmware updates, or it may not be getting enough power.

Whatever the reason for a malfunctioning Chromecast, try these troubleshooting steps to fix your Chromecast.