These directions apply to all of those Windows versions.
power cycle your computerif you haven’t done so already.
If that’s the case, a reboot might fix the problem.
Did you install a equipment or make a change in equipment Manager just before you noticed the error?
If so, it’s very possible that the change you made caused the problem.
Undo the change, start your PC, and then check again for the Code 28 error.
Update the driversfor the machine.
confirm you load the drivers for the correct operating system.
Many of these errors are triggered by attempting to drop in the wrong drivers for a gear.
One way to be sure you’re getting the right driver is to use afree driver updater tool.
If the drivers won’t update, try disabling your antivirus software during the update process.
Sometimes these programs misinterpret your driver updating as malicious and block it.
set up the latest Windows service pack.
As a last resort, you may need to replace the hardware that has the error.
It’s also possible that the rig is not compatible with this version of Windows.
you might check theWindows HCLto be sure.
If that doesn’t work, try aclean install of Windows.
As mentioned above, it’s almost always sparked by a missing driver for that particular piece of hardware.
FAQ
Error code 14 means that your gear must be restarted for the equipment to work properly.
Reboot your PC any time you make changes to gear drivers.
If you still have trouble, delete the UpperFilters and LowerFilters registry values.
Update or reinstall the drivers for the malfunctioning equipment, then start your gear.
