Just plug them in and go.
But you pay for this convenience in two ways: in actual cost and in limited configuration choices.
Select an External Hard Drive Case
In the modern-day, selecting a hard drive case is easy.
Read the instructions that came with your enclosure to learn how the case works.
A Phillips screwdriver is usually all that is required.
Keep one or two small receptacles nearby to hold small screws or parts removed during the disassembly process.
Put the screws in a safe place for later.
Don’t force the panel, though; it should slip off.
Check the manufacturer’s instructions if you have trouble.
The carrier contains internal interface electronics, the power supply, and the mounting points for the hard drive.
Another popular method is to combine the side mounting points with a special screw that has a rubber-like sleeve.
The assembly method you use depends on the drive.
implement the screws: Read the included instructions and follow along carefully.
This pattern helps ensure that the mounting holes in the case and the hard drive align correctly.
After you insert the screws, tighten them down by hand.
Dont use excessive force.
Making the connections may be difficult because of space.
Sometimes it’s easier to reverse the order for mounting the hard drive.
Make any necessary connections first, and then mount the drive to the case with the mounting screws.
This sequence can provide more working room to get stubborn cables connected.
Attach power to the enclosure: Most enclosures offer a power switch.
double-check the switch is set to off.
Then, plug the included power cord or power adapter into the enclosure.
Switch the enclosures power on: If the enclosure has a power-on light, it should be lit.
After a few seconds, the computer should recognize that an external hard drive is connected.
